CONCEPT

The Waller PC1300 Power Catamaran is intended as a comfortable and seaworthy ocean going power catamaran, suitable for living aboard for extended periods of time, or simply short term mucking about in boats with a few guests. The design style is that of a multi chine aluminium displacement catamaran. The multi chine allows easier construction, whilst the displacement hull form allows reasonable speeds with smaller engines and reasonable fuel costs. 

ENGINES

The PC1300 is powered by maximum twin 230 hp marine diesels which will allow maximum speeds of around 23 - 25 knots, with comfortable cruising at 10 - 15 knots (dependent on conditions). Smaller engines can be used with reduced performance. (100 bhp = approx 15 knots max, 10 knots cruising) 

CONSTRUCTION

The PC1300 is constructed from aluminium alloy throughout. Bulkheads and frames can be pre-cut using supplied DXF files for plasma or water jet cutting, whilst the remainder is straight forward stringers and plate.  No great metal shaping skills are required by the builder, as the vessel is multi chine to allow the use of all flat panel construction, however construction is limited  to amateur builders who have suitable skill in aluminium alloy welding, or have suitably skilled assistance. (a one week course in Mig / Tig welding at Taafe is usually not sufficient for a vessel of this size.)

ACCOMMODATION

The accommodation is laid out for comfortable living for two couples plus.  The main cabin area features a huge dinette / lounge area plus galley, with a separate toilet / shower opening to the aft deck. Forward and up two steps is the raised bridge deck, with a separate pilot berth. From the bridge deck, companions lead down a few steps to large and spacious forward double cabins, one or both of which can contain queen size beds if desired.  Above the main saloon and aft of the bridge deck is a sun deck.

Down aft to Port is the main bathroom area, with separate shower. To Starboard is a bunk cabin which can sleep up to three, or can be simply a double cabin, or an office or workroom. The vessel has a spacious aft deck for entertaining, and walk around side decks.
 

DIMENSIONS 

LOA                                           13.54 Metres
LOD                                           13.08 Metres
LWL                                           12.33 Metres
Beam                                           6.49 Metres
Draft                                            1.06 Metres
Displacement                               10,000 Kg 
Hull Beam/LWL ratio                   11.6 : 1
Power                                          2 x 230 hp diesels Maximum

Plans for the Waller PC1300 Power Catamaran  are extremely comprehensive, with 36 full A1 size sheets of plans, plus written specifications and building notes.
Study Plans .........................  $30.00 Aud.
Full Plans .......................... See Price List

Click your return button to go back to the menu page.