Here are the first construction photos of the Waller 1100 Catamaran. Please bare in mind that this boatr is being pro built, and like most professionals, the builders are leaving the finishing work until last, so these pictures look a little messy.

	Boat is built around its own bulkheads to save time and money. Here the first bulkheads are up.
	All bulkheads are up now.
	Note that timber framing is only fitted to those bulkheads which will later be cut away to ring frames (the cut out ply is then used for other structures.)
	Gunwales and stringers going on.
	Ply hull planking going on.
	Hull almost planked, seen from bow. Stem is also a ply fabrication.
	Aft cockpit and transom steps area - note that an extra step has been added at stern by builder (non standard)
	Raised deck and turret cabin virtually complete, and turret windows cut. You can see the excellent visibility possible from the main saloon cabin. Builder has not yet completed the edge boxing of the cabin  roof structure as per plan.
	Cabin side windows have been cut . By this stage some fairing has been done but very little finishing yet.

Back to Photo IndexBack to Waller 1100 Page